Thermo 335904 Скачать руководство пользователя страница 55

Страница: 55 / 94

Use

Cursor

→

and

Cursor

←

to position the

left cursor line to the desired wavelength value.
The instrument calculates the 3-point net
absorbance for the selected wavelengths.

Continue selecting the other wavelengths by
pressing

Next Cursor

to activate the center

and right cursor lines. Select the wavelengths
by positioning the cursor with the

Cursor

←

and

Cursor

→

keys. Repeat until all three

wavelengths have been selected.

Press

Enter Factor

to access the set factor

box. Enter the desired factor and press

ENTER

. The instrument calculates the value

for the 3-point net absorbance for the selected
wavelengths, multiplied by the selected factor.

Calculating the area under a curve

With your scan data displayed on the

Edit

Graph

screen, press

Math

. The

Math

Calculation

screen appears.

Press

Area

. The

Area Under the Curve

Measurement

screen appears.

Use

Cursor

→

and

Cursor

←

to position the

left cursor line to the desired wavelength value.
The instrument calculates the area under the
curve for the selected wavelengths.

Continue selecting the other wavelengths by
pressing

Next Cursor

to activate the next

cursor line. Select the wavelength by
positioning the cursor with the

Cursor

→

and

Cursor

←

keys.

Press

Set Options

to access the

set options

window.

Use the up and down arrows to highlight

Factor.

Enter the desired factor and press

ENTER

Use the up and down arrow to highlight

Calculation baseline.

Press

ENTER

to toggle

between

Zero

and

Tangent

Press

ESC

to return to the area under a curve

screen. The instrument calculates the area
under a curve for the selected wavelengths,
factor and calculation method.

Labeling peaks and valleys

With your scan displayed on the edit graph
screen, press

Math

. The

Math Calculation

screen appears.

Press

Peaks & Valleys

. The

Label Peaks and

Valleys

window appears.

Use the arrow keys to select the type of labels
you want displayed and press

ENTER.

The

instrument labels the selected items on your
scan data plot.

Using “General Tests” Software

3-23

BioMate 3 Operator’s Manual

Содержание 335904































































































Результаты поиска

Содержание 335904

Отзывы:

Thermo 335904, Руководство оператора, Страница: 55 / 94

Результаты поиска

Содержание 335904

Отзывы: