Thermo Scientific TSQ Altis Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 176

background image

© 2018 Thermo Fisher Scientific Inc. All rights reserved.

OptaMax NG, TSQ Fortis, and Viper are trademarks; Unity is a registered service mark; and
Hypersil GOLD AQ, Thermo Scientific, TSQ Altis, TSQ Quantis, and Xcalibur are registered trademarks of
Thermo Fisher Scientific Inc. in the United States. Fisher Scientific is a registered trademark of Fisher Scientific
Co. in the United States.

The following are registered trademarks in the United States and other countries: COMBICON is a registered
trademark of Phoenix Contact GmbH & Co. Microsoft and Windows are registered trademarks of Microsoft
Corporation. Teflon is a registered trademark of E.I. du Pont de Nemours & Co. The following are registered
trademarks in the United States and possibly other countries: Liquinox is a registered trademark of Alconox,
Inc. MICRO-MESH is a registered trademark of Micro-Surface Finishing Products, Inc. Nalgene is a registered
trademark of Nalge Nunc International Corporation. Oerlikon Leybold Vacuum is a registered trademark of
OC Oerlikon Corporation AG. SOGEVAC is a registered trademark of Oerlikon Leybold Vacuum. Swagelok
is a registered trademark of Swagelok Company Corporation. Tygon is a registered trademark of the division of
Saint-Gobain Performance Plastics Corporation. Rheodyne and Upchurch Scientific are registered trademarks
of IDEX Health & Science LLC. Vespel is a registered trademark of E.I. du Pont de Nemours & Co. Viton is a
registered trademark of DuPont Performance Elastomers LLC.

Chemyx is a trademark of Chemyx Inc. MX Series II is a trademark of IDEX Health & Science, LLC.

All other trademarks are the property of Thermo Fisher Scientific Inc. and its subsidiaries

Thermo Fisher Scientific Inc. provides this document to its customers with a product purchase to use in the
product operation. This document is copyright protected and any reproduction of the whole or any part of this
document is strictly prohibited, except with the written authorization of Thermo Fisher Scientific Inc.

The contents of this document are subject to change without notice. All technical information in this
document is for reference purposes only. System configurations and specifications in this document supersede
all previous information received by the purchaser.

This document is not part of any sales contract between Thermo Fisher Scientific Inc. and a purchaser. This
document shall in no way govern or modify any Terms and Conditions of Sale, which Terms and Conditions of
Sale shall govern all conflicting information between the two documents.

Release history: Rev. A June 2018

Software version: (Thermo) Foundation 3.1 and later, Xcalibur 3.0 and later, Tune 2.1 and later

For Research Use Only. Not for use in diagnostic procedures.

«
1
2
3
4
...
»

Содержание TSQ Altis

















































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TSQ Altis

Бренд: Landoll Страницы: 83

Бренд: Baoding Longer Precision Pump Страницы: 6

Бренд: Gardena Страницы: 8

Бренд: GARANT Страницы: 239

Бренд: p-light Страницы: 36

Бренд: Latham Страницы: 4

Бренд: SafeWaze Страницы: 23

Бренд: Labnet Страницы: 12

Бренд: ValueStore US Страницы: 2

Бренд: XanLite Страницы: 4

Бренд: Waterpik Страницы: 2

Бренд: WaterUps Страницы: 2

Бренд: B-K lighting Страницы: 2

Rack-mountable 8 x 8 USB 2.0 Interface with MX Core DSP Technology...

Бренд: M-Audio Страницы: 25

Бренд: Össur Страницы: 50

Бренд: Össur Страницы: 13

PRO-FLEX XC PXC0xyyz

Бренд: Össur Страницы: 68

Бренд: Össur Страницы: 25

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды