Thermo Scientific Sorvall ST Plus Series, Инструкция по эксплуатации

Страница: 82 / 172

3-50
Graphical User Interface
Files and Info
Tapping the Files and Info button on the navigation bar takes you to the “Files and Info” screen. The “File and
Info” screen lets you view technical information about the centrifuge, such as serial number and installed firmware
versions, and reset the centrifuge to its factory settings.
Figure 3–72: Files and Info Screen
Proceed as follows to reset the centrifuge to its factory settings:
1. Back up all data from the centrifuge you wish to preserve, such as user programs (see “Sharing Programs
between Centrifuges” on page 3-25 ) and logs (see “Logs” on page 3-44 ).
2. Tap the Files and Info icon on the navigation bar.
The “Files and Info” screen appears.
3. Tap the Factory Reset button.
The “Factory Reset” screen appears, cautioning you about the risk of losing settings.
4. If you are absolutely sure that you want to reset the centrifuge to its factory settings, tap the Start button to
initiate the reset process.
The “Factory Reset” pop-up window appears. A progress bar lets you follow the process.
When the “Factory Reset” process is complete, the (Factory Reset) “Complete” pop-up window appears.
3. 8. 4. Service
The Service button is reserved to service technicians and requires a special passcode. Its options are not
explained in this manual.