Thermo Scientific Sorvall ST Plus Series, Инструкция по эксплуатации

Страница: 47 / 172

3-15
Graphical User Interface
Alerts
When a maintenance action becomes due or when a minor disturbance without any impact on the safe operation
of the centrifuge occurs, the unit issues an alert. The centrifuge may continue to spin, but you must correct the
root cause as soon as possible to avoid damage to the samples and/or the unit itself.
When an alert is issued, the touchscreen display shows a yellow bar on top of the current screen, as illustrated
in the example in
Figure 3–27 below. The “Info & Health Status” area (see “Info & Health Status Area (Region 1)”
on page 3-2 ) displays a yellow warning triangle. A ticker-style message in the yellow alert bar explains the root
cause of the problem and provides instructions on how to handle the alert.
Additionally, a single audible alert tone is sounded.
Figure 3–27: Rotor End of Life Alert Message on Top of Home Screen
After a short time, the yellow alert bar goes away. Only the yellow warning triangle in the “Info & Health Status
“area indicates that alerts exists for the centrifuge, as shown in the example in
Figure 3–28 below.
Figure 3–28: Home Screen with Alert Message
The warning triangle icon has a blue circle with a white border that shows the number of active alerts. In the
example in
Figure 3–27 above, there is only one alert. However, if there is more than one alert present, the alert
count may be “2”, “3”, or more.
Tapping the
warning triangle icon opens an alert list that lets you view all alerts and details about each single
alert condition. This is explained in the following section.