Thermo Scientific SOLA II Flare, Руководство пользователя

Страница: 115 / 164

Appendix A
Watlow EZ Zone PM6 Series
Table A–18. Oven settings: Setup Page > Control Loop 1
Parameter Default Comment
Display Software Display Software
Heat Algorithm PID The method of heat control.
Cool Algorithm Off
TRU-TUNE+ Enable No
TRU-TUNE+ Band 0°C
TRU-TUNE+ Gain 3
Autotune Aggressiveness Critical Critical damped aggressiveness of
autotuning calculations.
Peltier Delay 0.0
User Failure Action User When user switches to manual mode,
controller sets output power to last
open-loop set point entered by user.
Input Error Failure Off When an input error switches control
to manual mode, controller sets
output to 0%.
Fixed Power 0.0%
Open Loop Detect Enable No
Open Loop Detect Time 240
Open Loop Detect Deviation 6.0°C
Ramp Action Off
Ramp Scale Minutes
Ramp Rate 1.0°C
Low Set Point 0°C The minimum value of the closed loop
set point range.
High Set Point 130.0°C The maximum value of the closed loop
set point range.
Set Point Open Limit Low -100.0% The minimum value of the open loop
set point range.
Set Point Open Limit High 100.0% The maximum value of the open loop
set point range.
Thermo Scientific SOLA II Flare User Manual A-11