Thermo Scientific SOLA II Flare, Руководство пользователя

Страница: 112 / 164

Appendix A
Watlow EZ Zone PM6 Series
Table A–11. Pyrolyzer settings: Operations Page > Control Loop 1
Parameter Default Comment
Display Software Display Software
Control Mode Auto The loop will use automatic control.
Autotune Set Point 90% The percentange of the current set
point that will be used by autotune.
Autotune No
Closed-Loop Set Point 1100°C The set point the controller will
automatically control to.
Idle Set Point 24°C The closed loop set point that can be
triggered by an event state.
Heat Proportional Band 14°C The PID proportional band for the heat
outputs.
Heat Hysteresis 2°C
The process value needs to be this far
into the On region before the output
turns on.
Cool Proportional Band 14°C The PID proportional band for the cool
outputs.
Cool Hysteresis 2°C The process value needs to be this far
into the On region before the output
turns on.
Time Integral 180 The PID integral (seconds).
Time Derivative 0 The PID derivative (seconds).
Dead Band 0°C The offset to the proportional band.
Open Loop Set Point 0.0% The fixed level of output power when
in manual (open loop) mode.
Table A–12. Pyrolyzer settings: Operations Page > Alarm 1
Parameter Default Comment
Display Software Display Software
Alarm Low Set Point -5°C The set point that will trigger a low
alarm.
Alarm High Set Point 5°C The set point that will trigger a high
alarm.
Thermo Scientific SOLA II Flare User Manual A-8