63
3. Select the
Language
item using the
Down
arrow key and press the
OK
button.
4. Select the internal software language, for example,
Francais
, using the
Down
arrow key, and then press the
OK
button to accept the selection.
5. Press the
F2
key to confirm the selection and to close the system parameters.
6. Return to the
Main
menu using the
Right
arrow key.
Filters
Multiskan FC comes with installed filters of 405 nm, 450 nm, and 620 nm.
You can introduce a filter to the internal software by moving to the
Filters
settings. The filter
wavelength must be between 340 and 850 nm.
The
Filters
settings window shows the current filters of the filter wheel.
Introducing a filter to the internal software
This section provides an example on how to enter the information of an additional filter, which has
been added to the filter wheel.
Note!
Before introducing the additional filter to the internal software, make sure the filter is
physically inserted into the next free filter position in the filter wheel and the filter wheel is placed
into the filter wheel slot.
1. In the
Main
menu, select the
Settings
menu using the
Left
arrow
key.
2. Select the
Filters
row using the
Down
arrow key and press the
OK
button.