34
You can define the following settings:
Ignore from beginning
– Ignores a defined number of points (readings), counted from the first
reading.
Ignore from end
– Ignores a defined number of points (readings), counted from the last reading.
Time to maximum
The time to maximum is used to calculate the time elapsed before the maximum measurement signal
in each well is reached.
You can define the following settings:
Ignore from beginning
– Ignores a defined number of points (readings), counted from the first
reading.
Ignore from end
– Ignores a defined number of points (readings), counted from the last reading.
Calculation parameters
You can define the calculation parameters in the
Calculation
window.
The plate layout parameters have to be set prior to measurement. The parameters cannot be
changed after measurement.
The available calculation types are:
curve fits
and
factor
.
You can select different calibrator curve fit types for quantitative calculation or a factor. You can also
use a stored curve for quantitative calculation.
