manualshive.com logo in svg

Thermo Scientific Invitrogen Countess II FL, Руководство пользователя

Поделиться
Скачать
Thermo Scientific Invitrogen Countess II FL Скачать руководство пользователя страница 77

To minimize the hazards of chemical waste:

• Read and understand the Safety Data Sheets (SDSs) provided by the

manufacturers of the chemicals in the waste container before you store, handle, or

dispose of chemical waste.

• Provide primary and secondary waste containers. (A primary waste container

holds the immediate waste. A secondary container contains spills or leaks from

the primary container. Both containers must be compatible with the waste

material and meet federal, state, and local requirements for container storage.)

• Minimize contact with chemicals. Wear appropriate personal protective

equipment when handling chemicals (for example, safety glasses, gloves, or

protective clothing). For additional safety guidelines, consult the SDS.

• Minimize the inhalation of chemicals. Do not leave chemical containers open. Use

only with adequate ventilation (for example, fume hood). For additional safety

guidelines, consult the SDS.

• Handle chemical wastes in a fume hood.
• After emptying the waste container, seal it with the cap provided.
• Dispose of the contents of the waste tray and waste bottle in accordance with

good laboratory practices and local, state/provincial, or national environmental

and health regulations.

If potentially hazardous waste is generated when you operate the instrument, you

must:

• Characterize (by analysis, if necessary) the waste generated by the particular

applications, reagents, and substrates used in your laboratory.

• Ensure the health and safety of all personnel in your laboratory.
• Ensure that the instrument waste is stored, transferred, transported, and disposed

of according to all local, state/provincial, and/or national regulations.

IMPORTANT! 

Radioactive or biohazardous materials may require special handling,

and disposal limitations may apply.

Electrical safety

Part

Symbol

Description

General

DANGER! ELECTRICAL SHOCK HAZARD. Severe electrical shock

can result from operating the Countess

™

 II Automated Cell

Counter or Countess

™

 II FL Automated Cell Counter without its

instrument panels in place. Do not remove instrument panels.

High-voltage contacts are exposed when instrument panels are

removed from the instrument.

Fuses

WARNING! FIRE HAZARD. For continued protection against the

risk of fire, replace fuses only with fuses of the type and rating

specified for the instrument.

Chemical waste

safety guidelines

Waste disposal

Appendix E 

Safety

Electrical safety

E

Countess

™

 II FL automated cell counter User Guide

77

Содержание Invitrogen Countess II FL



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды