Thermo Scientific Invitrogen Countess II FL Скачать руководство пользователя страница 71

Страница: 71 / 82

Safety

WARNING!

GENERAL SAFETY. Using this product in a manner not specified

in the user documentation may result in personal injury or damage to the

instrument or device. Ensure that anyone using this product has received

instructions in general safety practices for laboratories and the safety

information provided in this document.

Before using an instrument or device, read and understand the safety

information provided in the user documentation provided by the

manufacturer of the instrument or device.

Before handling chemicals, read and understand all applicable Safety Data

Sheets (SDSs) and use appropriate personal protective equipment (gloves,

gowns, eye protection, and so on). To obtain SDSs, see the “Documentation

and Support” section in this document.

Safety alert words

Four safety alert words appear in this document at points where you need to be aware

of relevant hazards. Each alert word—IMPORTANT, CAUTION, WARNING,

DANGER—implies a particular level of observation or action, as defined below:

IMPORTANT!

– Provides information that is necessary for proper instrument

operation, accurate installation, or safe use of a chemical.

CAUTION!

– Indicates a potentially hazardous situation that, if not avoided,

may result in minor or moderate injury. It may also be used to alert against

unsafe practices.

WARNING!

– Indicates a potentially hazardous situation that, if not avoided,

could result in death or serious injury.

DANGER!

– Indicates an imminently hazardous situation that, if not avoided,

will result in death or serious injury. This signal word is to be limited to the

most extreme situations.

Except for IMPORTANT! safety alerts, each safety alert word in this document

appears with an open triangle figure that contains a hazard symbol. These hazard

symbols are identical to the hazard symbols that are affixed to the instruments (see

Safety symbols in Appendix E).

Countess

™

II FL automated cell counter User Guide

Содержание Invitrogen Countess II FL



















































































Результаты поиска

Содержание Invitrogen Countess II FL

Отзывы:

Бренды по названию

Популярные бренды

Thermo Scientific Invitrogen Countess II FL, Руководство пользователя

Результаты поиска

Содержание Invitrogen Countess II FL

Отзывы:

Бренды по названию

Популярные бренды