Thermo Scientific Invitrogen Countess II FL Скачать руководство пользователя страница 26

Страница: 26 / 82

Identify objects counted

The Advanced

™

screen allows you to identify the objects (i.e., cells) counted in each

channel and included in the count results for further review. After reviewing the

marked objects, you can adjust the threshold for size, brightness, and/or circularity as

desired for your application (“Gate count results“ on page 27).

On the Results screen, click More. The Advanced

™

screen opens.

To identify the cells that are included in the count as live, press the Live toggle

button. Live cells will be circled in green on the screen.
To identify the cells that are included in the count as dead, press the Dead toggle

button. Dead cells will be circled in red on the screen.

Note:

You may select either or both options. In the following example, both Live

and Dead buttons are pressed and live and dead cells are marked with green and

red circles, respectively.

To unmark the cells identified as live (green) or dead (red) on the screen, press

the Live or the Dead toggle button again, respectively.

Advanced

™

screen

Identify live and

dead cells

Chapter 4

Cell count and cell viability assays

Identify objects counted

Countess

™

II FL automated cell counter User Guide

Содержание Invitrogen Countess II FL



















































































Результаты поиска

Содержание Invitrogen Countess II FL

Отзывы:

Бренды по названию

Популярные бренды

Thermo Scientific Invitrogen Countess II FL, Руководство пользователя

Результаты поиска

Содержание Invitrogen Countess II FL

Отзывы:

Бренды по названию

Популярные бренды