Thermo Scientific Invitrogen Countess II FL Скачать руководство пользователя страница 72

Страница: 72 / 82

Electrical symbols

The following table describes the electrical symbols that may be displayed.

Symbol

Description

Indicates the On position of the main power switch.

Indicates the Off position of the main power switch.

Indicates a standby switch by which the instrument is switched on to the

Standby condition. Hazardous voltage may be present if this switch is on

standby.

Indicates the On/Off position of a push-push main power switch.

Indicates a terminal that may be connected to the signal ground reference of

another instrument. This is not a protected ground terminal.

Indicates a protective grounding terminal that must be connected to earth

ground before any other electrical connections are made to the instrument.

Indicates a terminal that can receive or supply alternating current or

voltage.

Indicates a terminal that can receive or supply alternating or direct current

or voltage.

Safety symbols

The following table describes the safety symbols that may be displayed. Each symbol

may appear by itself or in combination with text that explains the relevant hazard (see

“Safety labels on instruments”). These safety symbols may also appear next to

DANGERS, WARNINGS, and CAUTIONS that occur in the text of this and other

product-support documents.

Symbol

Description

Caution, risk of danger. Consult the manual for further safety information.

Caution, risk of electrical shock.

Appendix E

Safety

Electrical symbols

Countess

™

II FL automated cell counter User Guide

Содержание Invitrogen Countess II FL



















































































Результаты поиска

Содержание Invitrogen Countess II FL

Отзывы:

Бренды по названию

Популярные бренды

Thermo Scientific Invitrogen Countess II FL, Руководство пользователя

Результаты поиска

Содержание Invitrogen Countess II FL

Отзывы:

Бренды по названию

Популярные бренды