Thermo Scientific HistoStar, Руководство оператора

Страница: 27 / 128

Chapter 2 - Basic Operation
19
Exit Sleep Mode
If HistoStar is not set for timer operation and has not been used for an extended period of time, it will switch
itself into a powered down state called 'Sleep Mode'.
Note
If HistoStar is set for timer operation, there will be no need to exit Sleep Mode before use, as the timer program
will ensure that it is ready for use by the set time.
This powered down state ensures that the essential heated areas of the instrument are maintained at their set
temperatures, whilst switching off non-essential systems to reduce energy consumption.
When HistoStar is in Sleep Mode the following screen will be displayed on the touchscreen display.
To exit Sleep Mode touch the 'ON' button at the bottom of the screen.
Note
If HistoStar has been in Sleep Mode for an extended period of time, it may be necessary to wait a while whilst the
Cold Module achieves its operating temperature.
Cold Module Stand-Alone Power-Up
If the Cold Module has been moved recently, allow the unit to stand on a level surface
for 8 hours before switching on.
Note
This procedure assumes that the HistoStar Cold Module is being used as a stand-alone instrument.
To power-up the Cold Module for stand-alone use:
• Switch the power switch to the 'ON' position.
• Switch the timer control switch to the 'ON' position.
• Ensure the compressor can be heard running.
Ensure the cold plate has reached its operating temperature before use.