Thermo Scientific GENESYS 10S Vis, Руководство пользователя

Страница: 54 / 134

11
Abs and %T Measurements—Advanced A-%T-C
Setting Up Test Parameters
46 GENESYS 10S Vis User Guide Thermo Scientific
• Setting Up Test Parameters
• Cell Correction
• Saving a Test
• Viewing the list of stored tests
• Taking Measurements
Setting Up Test Parameters
Y To set up test parameters
1. Highlight the desired parameter.
Some parameters appear only if you select one of the concentration modes, while others
appear regardless of the selected measurement mode. See
“Parameters” on page 117 for a
complete list.
2. When the parameters are set, press Save Test to save the test or Measure Sample to
measure a blank or samples.
Taking Measurements
Y To take measurements automatically (using Auto 6 or Auto 3)
1. Press Run Sample .
2. Install the blank and samples.
3. Press Measure Sample .
Y
To take measurements manually (using Manual 6 or Single Cell Holder)
1. Press Run Sample .
2. When prompted, place the blank and samples into the cell holder.
If the 6-Position Cell Holder is installed, place the blank in the B position and the
samples in positions 1 to 5.
3. Press Measure Blank .
If a 6-Position Cell Holder is installed, it moves to the B position to measure the blank
and returns to its previous position.
4. Press Measure Sample .