Thermo Scientific Barnstead GenPure xCAD Plus System, Руководство по эксплуатации

Страница: 91 / 128

13
Maintenance
Change the ultrapure cartridge
Thermo Scientific GenPure
85
Change the ultrapure cartridge
Replace the ultrapure cartridge when the maximum limiting value that you have set
for the ultrapure water is exceeded or when the “change cartridge” message is shown
in the display.
Step Action Figure
1 Switch the system off and shut off the supply of
feedwater.
2 Remove the cartridge cover by pressing the push
button.
3 Disconnect the quick connectors on the
feedwater inlet and purified water outlet of the
cartridge and remove the cartridge from the
system.
4 If you change an existing ultrapure cartridge
please sanitize your system.
For sanitize your system see under chapter “Disinfection”
on page 87 .
5 Locate the new ultrapure cartridge and insert it
into the system.
6 Plug the quick connects correctly onto the new
ultrapure cartridge. You will know they are
attached when an audible “click” is heard.
Replace the cartridge cover.
Feedwater supply
Cartridge
cover
Push button
Quick
connectors
ultrapure
cartridge
Outlet
Inlet
Outlet
Quick
connector
Inlet