Thermo Scientific Barnstead GenPure xCAD Plus System, Руководство по эксплуатации

Страница: 29 / 128

5
Technical specifications
Thermo Scientific GenPure
23
Electrical connections xCAD/Client
2x SUB-D socket 9 pin
Airborne sound emission
Sound-pressure level 49 db(A)
Ambient conditions
Operation area Indoor rooms
Maximum altitude above sea level Up to 2000 m
Temperature range during operation min. +2°C, max +40°C, 80% rel. rH, non condensing
Temperature range storage min. +2°C, max +60°C, 90% rel. rH, non condensing
Line-voltage variation Not more than
±
10 % of the line voltage
Transient overvoltages As usually occur in the supply network (overvoltage
category II acc. to IEC 60364-4-443).
The rated level of transient overvoltage is the withstand
impulse voltage acc. to overvoltage category II of IEC
60364-4-443.
Ventilation requirements There are no special requirements with regard to
ventilation.
Degree of pollution 2
Materials of parts which contact water
Pressure reducer NBR = Acrylnitril Butadien Rubber
Pump head Nylon with glass fiber
UV-Lamp High-purity synthetic quartz
UV Housing Stainless steel
Ultrapure cartridge PP = Polyethylene
UF Housing PC = Polycarbonate
Rinsing solenoid valve PA = Polyamide
Dispensing valve PET = Polyethyleneterephthalate
Conductivity measuring cells POM = Polyoxymethylen, stainless steel
Distributor block POM = Polyoxymethylen
Distributor block POM = polyoxymethylen
Connectors POM = Polyoxymethylen
Hoses PE = Polyethylene
O-Rings EPDM = Ethylene Propylene Diene Rubber