Thermo Scientific Barnstead GenPure xCAD Plus System, Руководство по эксплуатации

Страница: 81 / 128

12
System control
.OEM Menu
Thermo Scientific GenPure
75
Entering a code number
To prevent unauthorized access to system control, settings can only be changed when a valid code number
is entered and confirmed with Enter in this menu. Each code access is issued to the printer (RS 232) with
date, time and code number. Valid codes are found in this manual in section
“Code lock” on page 82 .
Press the menu-button 10 times then the display shows:
OEM Menu
Basic settings and limiting values can be changed in this menu. To make such changes in the
OEM-menu, the system must be unlocked first (see
“Code lock” on page 82
).
Accessing the OEM menu.
After system control has been unlocked, simultaneous presses on the Interval-button and the
Nonstop-button call the OEM menu. Following this, the "OEM menu Press Enter" prompt is
displayed. When this is confirmed with Enter, the first menu prompt can be worked on. To simplify
changing settings, press the UV-button to select the individual number in the numerical value which
you want to change. Now use the arrow buttons to enter the wanted number from 0 to 9 at that
selected position. Press Enter to save changes only.
A press on the menu-button takes you to the next menu prompt.
The setting can be changed with the arrow buttons.
Language selection
The language can be changed in this menu.
The choice is between English, French and German.
The setting can be changed with the arrow buttons.
Basic setting: English
After entering the OEM menu press the menu-button once then the display shows:
You need the right code to do this transaction. You can find the code under section
“Code lock” on page 82 .