Nanopure™ Analytical 1-1
Thermo Scientific
Section 1
Safety Information
Your Thermo Scientific Nanopure™ Analytical Ultrapure Water System has
been designed with function, reliability, and safety in mind. It is the user’s
responsibility to install it in conformance with local electrical codes. This
manual contains important operating and safety information. The user
must carefully read and understand the contents of this manual prior to
the use of this equipment. For safe operation, pay attention to Notes,
Cautions, and Warnings throughout the manual.
Water purification technology employs one or more of the following:
chemicals, electrical devices, mercury vapor lamps, steam and heated
vessels. Care should be taken when installing, operating or servicing
Thermo Scientific products. The specific safety notes pertinent to this
product are listed below.
Warnings
To avoid electrical shock, always:
1. Use a properly grounded electrical outlet of correct voltage and current
handling capacity.
2. Do not mount your Nanopure Analytical directly over equipment that
requires electrical service. Routine maintenance of this unit may
involve water spillage and subsequent electrical shock hazard, if
improperly located.
3. Replace fuses with those of the same type and rating.
4. Disconnect from the power supply prior to maintenance and servicing.
