8-2
Nanopure™ Analytical
Thermo Scientific
Section 8
Normal Operation
Dispensing Water
Automatic Dispensing
Use the dispense knob for manual dispensing or, use the “Dispense” switch
for volumetric or timed dispensing. See “User Settings.”
This feature (Factory set to “OFF.”) is accessible only from the normal
recirculating mode when the display is showing purity.
1. Place a container under the dispenser.
2. Press DISPENSE.
Water will start dispensing immediately!
Display
will read, “xx.M
Ω
-cm xx Liters Remaining” or “xx.M
Ω
-cm xx Seconds
Remaining,” or “AUTO DISPENSE <OFF>” depending on which
dispensing method was last chosen in the auto dispense menu.
Note
Press any switch except ENTER to stop dispensing. Display will read,
“Auto Dispense Interrupted by User.”
s
Note
If the Nanopure “Auto Dispense” feature is set to (TIME), a
connected Accudispense accessory (if applicable) will not automatically
dispense.
s
