10-2
Nanopure™ Analytical
Thermo Scientific
Section 10
Accessories
5. Remove the jumper plug from the back, upper left portion of the unit
and save for future use.
6. Plug the cable into the jumper plug outlet.
7. Reconnect the electrical power.
Accessory AY1367X1 (overflow float with 6 ft [2.83 meter] cable) is
designed as a user option to ensure automatic dispensers (time or
volumetric) do not overflow carboy-style containers. This accessory can be
especially helpful if the actual volume of a container is unknown. It can
also protect against overflows if the entered/stored volume of a previous
container has not been changed and is set for a volume greater than the
carboy being filled. Finally, the accessory can be useful for automatic time
dispenses as it is usually difficult to ensure the set time will equal a specific
volume of water.
1. Prior to initialing an automatic dispense (time or volumetric), plug
AY1367X1 into connector on back right side of Nanopure. See Figure
10-2.
2. Position carboy to be filled and place float assembly on open neck of
carboy. Position float assembly such that it will not interfere with
product water stream being dispensed into carboy.
Feedwater Float or
Pressure Sw. (cont.)
Dispense Overflow
Cutoff Float
Figure 10-2.
Dispense Overflow Cutoff Float
