9-8
Nanopure™ Analytical
Thermo Scientific
Section 9
User Settings
Auto Standby
(continued)
4. Press the UP or DOWN arrow to choose “YES.”
5. Press ENTER.
6. Press the UP or DOWN arrow until the desired time is displayed for
the unit to automatically enter Standby.
7. Press ENTER.
8. Press BACK until you return to the (Idle) display.
Note
If set to “YES”, unit will automatically enter Standby Mode only
once per day. If the unit mode is later changed from Standby, the unit will
not again automatically enter Standby until the preset Auto Standby time
is again reached.
s
Unit Under Counter (auto dispense lock-out) is factory-set to “NO”.
This option will lock out any type of automatic dispense out of the unit
(Accudispense accessory D13661 will still operate normally.) This will
prevent accidental dispensing from the unit if it is located under a counter
or similar area such that the unit dispenser is not in sight of the user but
the display is (i.e. remote mounted display.)
Note
When “UNIT UNDER COUNTER” is set to “YES,” Auto Dispense
will not be available from the main unit dispenser.
s
1. From the “Nanopure (Idle) xx:xx:xx xx/xx/xx”, press the UP or
DOWN arrow until display reads, “Advanced Menu.”
2. Press ENTER.
3. Press ENTER to proceed through the options until “UNIT UNDER
COUNTER” is displayed.
4. Press the UP or DOWN arrow to choose “YES.”
5. Press ENTER.
6. Press BACK until you return to the (Idle) display.
Unit Under Counter
