Thermo King TriPac Envidia, Руководство по установке

Страница: 33 / 80

31
Fabricating Refrigeration Hoses (continued)
Cut the Hose
1. Cut the hose to proper length with an appropriate cutting tool. Hand-held hose cutter (204-677) has been
specially designed for cutting all non-wire reinforced hose, such as TK 2000 Multi-Refrigerant hose. Be sure the
cut is made square to the hose length.
Slip on Two Clamps
2. Install one or two proper- size clips, depending on hose size, onto the cut end of the hose. Orientation of the clips
does not affect the performance of the connection. However, for ease of assembly, both clips should have the
same orientation.
CAUTION
: Failure to slide the clips over the hose at this time will require the clips to be stretched over the
hose or fitting later. This
may
permanently damage the clip.