manualshive.com logo in svg

Thermo King T-1000R, Руководство по обслуживанию


Поделиться
Скачать
background image

Operating Instructions Premium HMI

6-16

MAIN MENU OVERVIEW (SPECTRUM)

Truck TSR-2/3 SPECTRUM M/T Operator and Main Menu.

MAIN MENU CHOICES

LANGUAGE 

- If more than one language is enabled, this will be the first menu item to appear. If only one language is 

enabled, this menu will not appear. The Language Menu allows the operator to select a language from a list of up to 11 languages 
at one time. All subsequent displays are shown in the selected language. Three different language packages with a total of 23 
languages are available.  English is the default language and is provided in each of the packages.

ALARMS

 - Allows the operator to view all alarms, and allows most alarms to be cleared.  If only one language is enabled this 

will be the first menu item to appear.

DATA LOGGER

 - Allows the operator to set a Start of Trip marker to the ServiceWatch data logger. Also allows a Start of 

Trip and Print requests to be sent to the Optional DAS Data Logger (if installed).

HOURMETERS

 - Allows the operator to view the unit hourmeters that have the view feature enabled in the Guarded Access 

menu.  If the view feature for a particular hourmeter is not enabled then that hourmeter will continue to accumulate time but 
cannot be viewed from the Main Menu.  However, all hourmeters can be viewed from the Maintenance Menu, even if they are 
not enabled.

MODE

 - Allows the operator to change the unit operating modes if allowed.  Not all modes may appear depending on the 

settings selected from the Guarded Access menu and the HMI Control Panel software version.
• "Turn Off CYCLE-SENTRY Mode/Turn On CYCLE-SENTRY Mode (If CYCLE-SENTRY is Off unit runs in Continuous).
• Allow Keypad Lockout to be selected.

• Start Sleep Mode.

PRETRIP

 - Allows the operator to start a Pretrip Test.  If an alarm is active, the Pretrip Test is not allowed and the operator 

is prompted to clear the alarm(s).

ELECTRIC STANDBY

 - If the Electric Standby option is present and the Diesel to Electric Auto-switch feature is set NO, 

this feature allows the operator to manually select electric mode operation. This feature does not appear if the unit does not feature 
optional Electric Standby or if the Diesel to Electric Auto-switch feature is set YES.

DIESEL MODE

 - If a unit equipped with electric standby is running in electric mode and the Electric to Diesel Auto-switch 

feature is set NO, this feature allows the operator to manually select diesel mode operation. This feature does not appear if the 
unit does not feature optional Electric Standby or if the Electric to Diesel Auto-switch feature is set YES.

ADJUST BRIGHTNESS

 - Allows the operator to adjust the HMI Control Panel display backlight intensity as required by 

local conditions.

TIME 

- Allows the operator to view the unit time and date.  The time and date cannot be changed from this menu.

LANGUAGES

If the Language feature is enabled, an alternate language can be selected from the Language Menu. After a new language is 

chosen, all subsequent displays will appear in that language. If the language feature is not enabled this menu does not appear.  
The default language is English.  Only languages that have been enabled in Guarded Access will appear. Exercise care when 
changing languages, as once changed all HMI Control panel displays will be in the new language. If the user is not familiar with 
the new language, problems may be experienced returning to the default language.

The languages available are dependent on the HMI control panel software revision.

• Languages currently supported by software revision 65xx are English, Spanish, French, German, Italian, Dutch, Portuguese, 

Greek, Turkish, Hebrew and Arabic.

• Languages currently supported by software revision 66xx are English, Danish, Russian, Norwegian, Swedish, Finnish, Polish, 

Hungarian, Romanian, Bulgarian and Czech.

• Languages currently supported by software revision 67xx are English, Japanese and Chinese.  Other than the languages 

supported, software revisions 65xx, 66xx and 67xx are functionally identical.

To select an alternate language, press the MENU
key.(Figure "Menu Key" page 6-15)

Содержание T-1000R



























































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для T-1000R

York 36 Technical Manual preview
36
Бренд: York Страницы: 44
Napoleon Room Air Conditioner User Manual preview
Room Air Conditioner
Бренд: Napoleon Страницы: 30
Zamil CX SERIES Installation, Operation & Maintenance Manual preview
CX SERIES
Бренд: Zamil Страницы: 20
Samsung AM TN4 KH Series Installation Manual preview
AM TN4 KH Series
Бренд: Samsung Страницы: 40
Gree GWH09MA-A3DNC5A Owner'S Manual preview
GWH09MA-A3DNC5A
Бренд: Gree Страницы: 25
AboveAir Technologies MissionCritical MC-2x2 Engineering Manual preview
MissionCritical MC-2x2
Бренд: AboveAir Technologies Страницы: 24
Cryo's YCNQ 251 GR Service Manual preview
YCNQ 251 GR
Бренд: Cryo's Страницы: 16
CAC / BDP 40MKCF Installation Instructions Manual preview
40MKCF
Бренд: CAC / BDP Страницы: 26
TECO TWS-TSO26H3DVEM Owner'S Manual preview
TWS-TSO26H3DVEM
Бренд: TECO Страницы: 20
Zibro SC1226 Installation & Service Manual preview
SC1226
Бренд: Zibro Страницы: 86
ICP C4A436GKD200 Homeowner'S Information preview
C4A436GKD200
Бренд: ICP Страницы: 2
Daikin FFQ25BV1B Installation Manual preview
FFQ25BV1B
Бренд: Daikin Страницы: 23
Sea Breeze 24A43ZCX Operating Instructions Manual preview
24A43ZCX
Бренд: Sea Breeze Страницы: 12
Dyson purehot+cool link Manual preview
purehot+cool link
Бренд: Dyson Страницы: 136
Heat Controller Comfort-Aire BD-101 Service Manual preview
Comfort-Aire BD-101
Бренд: Heat Controller Страницы: 35
Wow WAC 1200PLUS Instruction Manual preview
WAC 1200PLUS
Бренд: Wow Страницы: 68
UFESA PF5500 fresh air Instruction Manual preview
PF5500 fresh air
Бренд: UFESA Страницы: 52
GE AKV12 and Owner'S Manual And Installation Instructions preview
AKV12 and
Бренд: GE Страницы: 24

Бренды по названию

Популярные бренды

Загрузить еще бренды