Thermo King Precedent C-600M, Руководство оператора

Страница: 77 / 166

Operating Instructions
75
Alarms
The Alarm Menu allows the operator to view any active
alarms, and allows most alarms to be cleared.
Log Alarms
Log Alarms are indicated for 30 seconds each time the unit is
turned on. This level of alarm serves as a notice to take
corrective action before a problem becomes severe.
Maintenance items such as maintenance hourmeter time-outs
are Log Alarms. The TemperatureWatch screen is not disabled
if only Log Alarm(s) are active.
When the unit is turned on the display will show the Thermo
King Logo and then the "Configuring System" message. If Log
Alarm(s) are present the Log Alarm notice will appear on the
display for 30 seconds as shown in Figure 70. The remote
indicator alarm light (if installed) will also be on during this
period. The Standard Display will appear and the remote
indicator alarm light will go off after 30 seconds.
NOTE: The Alarm Icon does not appear on startup with Log
Alarms present.
Figure 70: Log Alarm Notice
Check Alarms
Check Alarms are indicated by a steady alarm icon at the side
of the display. If the alarm is specific to a zone then a smaller
alarm icon will appear next to the affected zone. This level of
alarm serves as a notice to take corrective action before a
problem becomes severe. The unit will run with Check Alarms
but some features and functions may be inhibited. The
TemperatureWatch screen is disabled if a Check Alarm is
active.