Thermo King Precedent C-600M, Руководство оператора

Страница: 65 / 166

Operating Instructions
63
• If running a Pretrip Test on a trailer loaded with sensitive
cargo, monitor the load temperature during the test as
normal temperature control is suspended during pre-trip
operation.
• Always perform Pretrip Tests with the trailer cargo doors
closed to prevent false test failures.
Pretrip Test Sequence
Pretrip tests proceed in the order shown below. A Full Pretrip
Test is started with the engine or motor not running and
includes all tests. A Running Pretrip Test is started with the
engine or motor running and does not include the Amp Checks
or Engine Start Check.
•
Amp Checks - Each electrical control component is
energized and the current drawn is confirmed as within
specification.
• Engine Start - The Engine will start automatically.
• Defrost - If the coil temperature is below 45°F (7°C), a
defrost cycle is initiated.
• RPM Check - The engine RPM in high and low speed is
checked during the Cool Check.
• Zone 1 Cool Check - The ability of the unit to cool in low
speed is checked.
• Zone 1 Heat Check - The ability of the unit to heat in low
speed is checked.
• Zone 1 Return to Cool Check - The ability of the unit to
return to cool mode is checked
• Zone 2 Cool Check - The ability of the unit to cool in low
speed is checked.
• Zone 2 Heat Check - The ability of the unit to heat in low
speed is checked.
• Zone 2 Return to Cool Check - The ability of the unit to
return to cool mode is checked
• Zone 3 Cool Check - The ability of the unit to cool in low
speed is checked.
• Zone 3 Heat Check - The ability of the unit to heat in low
speed is checked.
• Zone 3 Return to Cool Check - The ability of the unit to
return to cool mode is checked