117
GB
6.16 Group address channel A light
This parameter is used when using the SendoClic.
Channel A lighting can be allocated a group address (basic setting is
I
). The group address al
-
located to the channel is also to be allocated the SendoClic button.
Group addresses can be programmed with the SendoClic in the PlanoCentro or adjusted with
the SendoPro.
Additional information can be found in the SendoClic operation manual.
Value range
Adjustable values
I , II , III ,
All
6.17 Scenes 1 , 2
These parameters are used when using the SendoClic. The switching status of channel A lighting
can be allocated scene 1 and scene 2.
Additional information can be found in the SendoClic operation manual.
Value range
Adjustable values
On/Off
7. Read-out data
By means of the SendoPro management remote control the actual brightness value A as well as
the diagnostic and statistical data can be read-out.
The actual brightness value A is displayed in the parameter list, together with the brightness set
point A.
Additional information can be found in the SendoPro operation manual.
