107
GB
5.2 Activating the basic settings
The basic settings have to be activated after the rotary switch position SW1 has changed.
Adjusting the rotary switch during operation (live) does not have an effect.
Activation
Description
Powerup
The rotary switch position SW1 is monitored during the first 5 hours of
operation. The rotary switch position is read if the position is changed
during powerup and the value is adopted according to the table.
SW1
SW2
0
1
2 3 4
5
6
78
9
SW2 (3 sec)
The SW2 button can be pressed and held down for 3 seconds to revert
back to the basic settings (SW1). The presence detector restarts at this
point.
SendoPro
The basic settings according to the rotary switch position can be adopted
with the SendoPro Management remote control command.
