TEXIO LSG SERIES, Инструкция по эксплуатации

Страница: 68 / 167

56
Note
When the Main settings are saved or recalled,
the Go-NoGo settings are also saved/recalled.
See the Save/Recall chapter for details, page
57.
2-7-2. Running a Go-NoGo Test
Description Go-NoGo test results are displayed in the
measurement panel.

GO indicates pass (good).

NG indicates fail (no good).
Operation
1.
Press
Main
> Configure[F5] > Go-NoGo[F3].
2.
Set SPEC Test to ON.

When SPEC Test is ON, SPEC will appear in
the Operation Status Panel. This means the
unit is ready for Go-NoGo testing.
3.
Turn the load on.

The test starts from the time the load was
turned on + the Delay Time.
Display:
GO
Mode
CP
IRange
H 35A
VRange
L 15V
Function
Dynamic
Configure
0.000
V
0.000
A
0.00
w
Timer1 0.025
Level2 0.00
Level1 0.00
LOAD RS232
Fine
31/Oct/2013
mS
W
W
SPEC test = ON
SPEC
GO
Test result
Display:
NG
Mode
CP
IRange
H 35A
VRange
L 15V
Function
Dynamic
Configure
0.000
V
0.000
A
0.00
w
Timer1 0.025
Level2 0.00
Level1 0.00
LOAD RS232
Fine
31/Oct/2013
mS
W
W
SPEC test = ON
SPEC
NG
Test result