Texi Fox 25, Руководство пользователя

Страница: 190 / 200

RU
ПОТАЙНАЯ СТРОЧКА
УНИВЕРСАЛЬНАЯ ЛАПКА И НАПРАВЛЯЮЩАЯ
ПОТАЙНАЯ СТРОЧКА ЭЛАСТИЧНАЯ E и
ПОТАЙНАЯ СТРОЧКА F используется для
подшивания юбок, брюк – такой шов
не виден на лицевой стороне ткани.
Для этого шва необходимо идеально
подобрать цвет ниток под цвет
ткани. Используйте универсальную
лапку и направляющую для потайного
шва либо специальную лапку для
потайного шва.
1. Сложить ткань так, как показано на
рисунке. Расстояние должно быть в
пределах 0,4-0,7 см.
2. Опустить лапку, открутить винт
крепления лапки, чтобы поместить
направляющую между винтом
и креплением лапки. Закрутить
винт, размещая приспособление
посередине лапки.
3. Поднять лапку, поместить ткань под
лапкой .
4. Опустить лапку, шить медленно
для лучшего контроля, так, чтобы
прямая строчка проходила по
краю, а строчки зигзага проходили
по верхнему слою сложенного
материала.
5. Проверяйте правильность
продвижения материала
направляющей.
6. По окнчании работы заутюжьте
материал. На лицевой стороне
проколы иглы должны быть почти не
видны.
19
0.4~
0.7c
m
UTILITY STITCHES
Blind stitch
Fold up the fabric as illustrated.
Lower the presser foot, then loosen the foot holder
screw to place the hem guide between the screw
and the shank of foot holder. Tighten the screw
making sure the wall of hem guide is placed in the
middle of the toes of the presser foot.
Raise the presser foot and place the fabric under the
foot so that the soft fold rests against the wall of hem
guide.
Lower the foot, then stitch slowly for better for better
control so that the zigzag stitches fall on the hen
allowance and pierce the soft fold. While sewing,
make sure the soft fold runs along the wall of hem
guide.
Spread the fabric flat with the right side facing up.
+
1~4
0.5~1
E
F
Machine Setting
19
0.4~
0.7c
m
UTILITY STITCHES
Blind stitch
Fold up the fabric as illustrated.
Lower the presser foot, then loosen the foot holder
screw to place the hem guide between the screw
and the shank of foot holder. Tighten the screw
making sure the wall of hem guide is placed in the
middle of the toes of the presser foot.
Raise the presser foot and place the fabric under the
foot so that the soft fold rests against the wall of hem
guide.
Lower the foot, then stitch slowly for better for better
control so that the zigzag stitches fall on the hen
allowance and pierce the soft fold. While sewing,
make sure the soft fold runs along the wall of hem
guide.
Spread the fabric flat with the right side facing up.
+
1~4
0.5~1
E
F
Machine Setting
19
0.4~
0.7c
m
UTILITY STITCHES
Blind stitch
Fold up the fabric as illustrated.
Lower the presser foot, then loosen the foot holder
screw to place the hem guide between the screw
and the shank of foot holder. Tighten the screw
making sure the wall of hem guide is placed in the
middle of the toes of the presser foot.
Raise the presser foot and place the fabric under the
foot so that the soft fold rests against the wall of hem
guide.
Lower the foot, then stitch slowly for better for better
control so that the zigzag stitches fall on the hen
allowance and pierce the soft fold. While sewing,
make sure the soft fold runs along the wall of hem
guide.
Spread the fabric flat with the right side facing up.
+
1~4
0.5~1
E
F
Machine Setting
19
0.4~
0.7c
m
UTILITY STITCHES
Blind stitch
Fold up the fabric as illustrated.
Lower the presser foot, then loosen the foot holder
screw to place the hem guide between the screw
and the shank of foot holder. Tighten the screw
making sure the wall of hem guide is placed in the
middle of the toes of the presser foot.
Raise the presser foot and place the fabric under the
foot so that the soft fold rests against the wall of hem
guide.
Lower the foot, then stitch slowly for better for better
control so that the zigzag stitches fall on the hen
allowance and pierce the soft fold. While sewing,
make sure the soft fold runs along the wall of hem
guide.
Spread the fabric flat with the right side facing up.
+
1~4
0.5~1
E
F
Machine Setting
Texi Fox 25 190