Texi Fox 25, Руководство пользователя

Страница: 93 / 200

ES
Para abrir el recipiente con los accesorios,
estire hacia usted la tapa de la mesa (ver
dibujo).
Los accesorios se encuentran en un
envase extraíble.
1. 3 bobinas
2. Juego de agujas (3 & Aguja doble)
3. Destornillador
4. Abre ojales con cepillo
5. Pie para inserción de cremalleras
6. Guía
7. Pie para coser cremallera
8. Pie prensatela especial para coser
botones
Coloque la máquina sobre una mesa estable.
1. Introduzca la clavija de la máquina en el
enchufe hembra de la máquina.
2. Introduzca la clavija de alimentación en la
toma de corriente.
3. Encienda el interruptor de alimentación.
4. Se encenderá la lámpara de costura LED.
5. Para apagar la máquina, apague el
interruptor y desconecte el cable de
alimentación de la toma.
Antes de conectar el cable de alimentación,
asegúrese de que la tensión y frecuencia
indicadas en la máquina coincidan con su
corriente eléctrica.
RECIPIENTE PARA ACCESORIOS
ACCESORIOS
CONEXIÓN DE LA MÁQUINA A LA CORRIENT
3
2
1
3
5
4
7
6
8
9
KNOWING YOUR SEWING MACHINE
Power line cord/foot control
Make sure that the sewing machine is turned off (the
power switch is set to “O”), and then connect the plug
of the power line and into the appliance inlet and your
wall outlet.
The foot that comes on your sewing machine
is called zigzag foot and will be used for the
majority of your sewing.
Setting up your machine
Bu sure to wipe off any surplus oil from needle
plate area before using your machine the first
time.
Power/light switch
Your machine will not operate until the power/light switch is turned on. The same switch controls
both the power and the light.
When servicing the machine, or changing needles, etc., machine must be disconnected from
the power supply.
NOTE
:
When foot control is disconnected,
the machine will not operate.
Always disconnect the machine from power
supply by removing the plug from the wall-outlet.
Sewing speed can be varied the foot control.
The harder you press on the control, the faster
machine runs.
Accessories
1. Bobbins (3pcs)
2. Needle 3 pcs and twin needle 1 pc
3. Multi-function screwdriver
4. Seam guide(optional)
5. Ripper/Brush
6. Buttonhole foot
7. Guide presser foot
8. Zipper foot
9. Button fitting foot
Power/light
switch “OFF” Power/light
switch “ON”
3
2
1
3
5
4
7
6
8
9
KNOWING YOUR SEWING MACHINE
Power line cord/foot control
Make sure that the sewing machine is turned off (the
power switch is set to “O”), and then connect the plug
of the power line and into the appliance inlet and your
wall outlet.
The foot that comes on your sewing machine
is called zigzag foot and will be used for the
majority of your sewing.
Setting up your machine
Bu sure to wipe off any surplus oil from needle
plate area before using your machine the first
time.
Power/light switch
Your machine will not operate until the power/light switch is turned on. The same switch controls
both the power and the light.
When servicing the machine, or changing needles, etc., machine must be disconnected from
the power supply.
NOTE
:
When foot control is disconnected,
the machine will not operate.
Always disconnect the machine from power
supply by removing the plug from the wall-outlet.
Sewing speed can be varied the foot control.
The harder you press on the control, the faster
machine runs.
Accessories
1. Bobbins (3pcs)
2. Needle 3 pcs and twin needle 1 pc
3. Multi-function screwdriver
4. Seam guide(optional)
5. Ripper/Brush
6. Buttonhole foot
7. Guide presser foot
8. Zipper foot
9. Button fitting foot
Power/light
switch “OFF” Power/light
switch “ON”
Interruptor
de apagado
Interruptor
de encendido
2
1
3
4 6 5 7 8
Texi Fox 25 93