Texecom Veritas 8, Руководство по установке

Страница: 33 / 44

Programming
INS 034-9 33
3.12.1 Programming Service Timer One (Reminder)
#)
From the Programming Menu, enter
#)
. All the zone lights will turn off. Enter
Service Timer One (Reminder) date as a 6 digit number; Day, Day, Month,
Month, Year, Year
(e.g. to program the 1st of April 1999 enter
!"!%((
).
Zone lights 1, 2, 3, 4, 5 and 6 will illuminate in turn as each digit of the new date is
entered.
Press
,
. The system will chime to confirm the new date has been
accepted. The system will then automatically revert to the Programming Menu and
all the zone lights will illuminate.
3.12.2 Programming Service Timer Two (Nuisance) #*
From the Programming Menu, enter #* . All the zone lights will turn off. Enter
Service Timer Two (Nuisance) date as a 6 digit number; Day, Day, Month,
Month, Year, Year
(e.g. to program the 25th of December 2000 enter
#&"#!!
). Zone lights 1, 2, 3, 4, 5 and 6 will illuminate in turn as each digit
of the new date is entered. Press , . The system will chime to confirm the
new date has been accepted. The system will then automatically revert to the
Programming Menu and all the zone lights will illuminate.
3.12.3 Programming Service Timer Three (Lockout)
#(
From the Programming Menu, enter
#(
. All the zone lights will turn off. Enter
Service Timer Three (Lockout) date as a 6 digit number; Day, Day, Month,
Month, Year, Year
(e.g. to program the 1st of January 2001 enter
!"!"!"
). Zone lights 1, 2, 3, 4, 5 and 6 will illuminate in turn as each digit
of the new date is entered. Press
,
. The system will chime to confirm the
new date has been accepted. The system will then automatically revert to the
Programming Menu and all the zone lights will illuminate.
3.13 Programming the Times
$+
The system has the following six time delays and one test time which are all
programmable:
Number Time Delay
" Full Set Exit Time (seconds)
#
Part Set Exit Time (seconds)
$
Full Set Entry Time (seconds)
%
Part Set Entry Time (seconds)
& Bell Cut Off Time (minutes)
'
Part Set Error Tone Suspension Time (seconds)
(
Zone Soak Test Time (days)
To program any of the above, from the Programming Menu, press $ followed by
the corresponding time delay number (e.g. for the Part Set Entry Time, enter
$%
). All the zone lights will turn off. Enter the desired time as a two digit
number (e.g. for 5 seconds enter
!&
). Zone 1 light will illuminate when the first
digit is entered. Zone 2 light will illuminate when the second digit is entered. Press
, . The system will chime to confirm the new time has been accepted.