TEUPEN LEO 15 GT Скачать руководство пользователя страница 7

Страница: 7 / 208

General

1.1

Information about these instructions

These instructions enable the safe and efficient han-

dling of the machine. These instructions are a compo-

nent of the machine and must be kept in the immediate

vicinity of the machine so that they are accessible to the

personnel at any time.
Before beginning any work, the trained personnel must

have read through these instructions carefully and

understood them. The basic requirement for safe

working is adherence to all the specified safety instruc-

tions and operating instructions in these instructions.
In addition, the local accident prevention regulations

and general safety provisions for the area of application

of the machine apply.
Figures in these instructions serve the purpose of basic

understanding and can deviate from the actual model.

1.2

Explanation of symbols

Safety instructions are marked with symbols in these

instructions. The safety instructions are always intro-

duced by signal words which express the extent of the

danger.

DANGER!

This combination of symbol and signal word

indicates an immediately-dangerous situation

which will cause death or severe injuries if not

avoided.

WARNING!

This combination of symbol and signal word

indicates a possibly-dangerous situation

which could cause death or severe injuries if

it is not avoided.

Safety instructions

General

13.02.2013

Aerial access platform Leo15GT 2012

Содержание LEO 15 GT

















































































































































































































Результаты поиска

Содержание LEO 15 GT

Отзывы:

Похожие инструкции для LEO 15 GT

Бренды по названию

Популярные бренды

TEUPEN LEO 15 GT, Перевод оригинальной инструкции по эксплуатации

Результаты поиска

Содержание LEO 15 GT

Отзывы:

Похожие инструкции для LEO 15 GT

Бренды по названию

Популярные бренды