TEUPEN LEO 15 GT, Перевод оригинальной инструкции по эксплуатации

Страница: 134 / 208

No. Description
70 Error in checking load curve. Check load curves and save again.
71 Error in calculating load limit. Check load curves and angle sensors of telescopic
arm.
72 Max. current of basket scale exceeded, check basket scale.
73 Min. current of basket scale not reached, check basket scale.
74 Max. current of basket scale exceeded, check basket scale.
75 Basket scale delivers different values, check basket scale.
76 Software error
77 Calibrated values of outputs are wrong, check values or load factory settings.
78 Software error / hardware error.
79 Software error / hardware error.
80 Joystick values wrong. Check joysticks and their parametrization.
81 Joystick values of remote control wrong. Check remote control.
82 Calibrated values of joysticks wrong, check values or load factory settings.
83 Second control cannot be reached via internal CAN bus. Check CAN connection
and second control.
84 Upon starting the controller the second controller was already started. Check
voltage supply and CAN bus.
85 Check internal CAN bus.
86 Check internal CAN bus.
87 Check internal CAN bus.
88 Software error
89 Check internal CAN bus.
90 Check external CANopen bus.
91 Check external CANopen bus.
92 Check external CANopen bus.
93 Check external CANopen bus.
94 Radio receiver on Emergency Stop circuit, error does not occur.
95 Check radio transmitter and radio receiver or check external CANopen bus.
96 The offset value exceeds the permissible range. Check resolver transducer and
calibrate again.
97 Error when reading in angle sensors on telescopic arm. Check resolver trans-
ducer and supply.
Faults
13.02.2013 Aerial access platform Leo15GT 2012 130