TEUPEN LEO 15 GT, Перевод оригинальной инструкции по эксплуатации

Страница: 180 / 208

4.2.3. Electric starter
– For starting preparations, see Chapter 4.2.1.
19
20
– Insert the key to its stop and turn it to
position I , Fig. 19 and Fig. 20.
Depending upon the model, the battery charge
telltale „2“ and the oil pressure warning light „3“
will come on.
The engine temperature display „4“ (additional
equipment) lights up if the temperature at the
cylinder head becomes too high.
Switch off the engine and trace and eliminate
the cause of the problem,
see chapter 6.
1
2
3
4
5
– Turn the key to position II .
– Release the key as soon as the engine runs.
The starting key must spring back to position I
and remain there during engine operation.
– The battery charge and oil pressure lights
should extinguish directly after the engine
starts. The display lamp „1“ lights up to show
that the engine is running.
– Prior to starting up again, the key has to be
returned to position 0 . When the engine is
running the starter repeat lock in the ignition
switch will prevent the starter from engaging
and suffering damage.
Preheater system
(optional extra)
When starting a cold engine, the preheat indica-
tor „5“ will light, Fig. 19 and Fig. 20.
– Start the engine immediately after the light
goes out.
Fuel shut-off valve, stop solenoid
(additional equipment)
21
As soon as the starting key is at Position I ,
fuel shut-off valve „1“ is electrically released .
The fuel feed to the injection pump is then open
and the engine is ready to start.
13