TEUPEN LEO 15 GT Скачать руководство пользователя страница 65

Страница: 65 / 208

Anchor and secure the aerial access platform to

the means of transport, e.g. with safety belts in the

lashing eyes (

Fig. 39

/1).

The lashing eyes are marked with the

Fig. 40 symbol.

Begin transport.

Unloading from a loading area takes place in reverse.

To do this, proceed as follows:

Back the aerial access platform up slowly.

Before tipping, slow down and drive carefully past

the tipping point.
After passing the tipping point, it is safe to speed

up again.

5.4

Storage

Store the machine under the following conditions:

Do not store outdoors.

Store dry and dust-free.

Do not subject to any aggressive media.

Protect against solar radiation.

Avoid mechanical shocks.

Storage temperature: 15 to 35 °C.

Relative humidity: max. 60 %.

In case of storage longer than 3 months, check the

condition of all parts regularly. If necessary, freshen

or replace the rust-proofing.

Fig. 39: Lashing eyes

Fig. 40: Lashing eye symbol

Unloading

Storage of the machine

Transport and storage

13.02.2013

Aerial access platform Leo15GT 2012

Содержание LEO 15 GT

















































































































































































































Результаты поиска

Содержание LEO 15 GT

Отзывы:

Похожие инструкции для LEO 15 GT

Бренды по названию

Популярные бренды

TEUPEN LEO 15 GT, Перевод оригинальной инструкции по эксплуатации

Результаты поиска

Содержание LEO 15 GT

Отзывы:

Похожие инструкции для LEO 15 GT

Бренды по названию

Популярные бренды