Teufel KA.L30, Руководство пользователя

Страница: 117 / 136

117
EN
FR
ES
IT
DD
DE
KnieAgil® Joints User Manual R1
Turn the screw anti­clockwise towards
<­> to decrease extension damping (stop
damping).
Please note:
Extension damp­
ing has to be decreased if the prosthesis‘
swing behaviour does not suffice to put
the joint into a secure extended position.
3
#30
Adjusting the Extension Spring
• The spring under the cover is there to
adjust extension assist.
• A cap screw with a scale (1­5), which
can be used to adjust the initial ten­
sion of the spring, is part of the front
spring (orange).
• Use the enclosed adjustment key to
make any adjustements: Insert the key
into one of the holes in the cap screw.
• Turn the cap screw clockwise: Initial
tension is increased, more flexion
resistance when flexion is initiated.
• Turn the cap screw anti­clockwise: In­
itial tension is decreased, less flexion
resistance when flexion is initiated.
• Please note: A weaker spring is
enclosed with every KnieAgil® R1.
This spring, however, should only
be used when the initial tension is
too strong for the user although the
spring has been set to the lowest
initial tension possible.
Clockwise: More Initial Tension
Anti­Clockwise: Less Initial Tension
Replacing the Spring
• The spring may only be replaced
while there is no weight put on the
joint. Use the enclosed adjustment
key to replace the spring. Insert the
key into one of the adjustment holes
of the cap screw.