6
IMPORTANT INfORMATION AbOuT ThIs MANuAl
© TESVOLT We reserve the right to make technical changes. Version RD.TI.015.E.ENG_Installation_Manual_TS48V_v.C.01 Last revised 06/2020
CAUTION – RISK OF EXPLOSION!
Improper handling or fire can cause lithium battery cells to ignite
or explode and cause serious injuries.
•
Do not install or operate the battery modules in potentially explosive or areas with high humidity.
•
Store the battery modules in a dry place and within the temperature ranges specified in the data sheet.
•
Do not open, drill through or drop the battery cells or modules.
•
Do not expose the battery cells or modules to high temperatures.
•
Do not throw the battery cells or modules into a fire.
•
If a fire occurs, use class D metal fire extinguishers.
•
Do not use defective or damaged battery modules.
CAUTION – HOT SURFACE!
In the event of malfunction, components can become very hot and cause
serious injury if touched.
•
Switch off the storage system immediately if it is defective.
•
Take particular care if malfunctions or defects become apparent when handling the unit.
NO NAKED FLAMES!
Handling naked flames and sources of ignition in the immediate vicinity of the
storage system is prohibited.
DO NOT INSERT ANY OBJECTS INTO THE STORAGE SYSTEM CASING’S OPENINGS!
No objects,
such as screwdrivers, may be inserted through openings in the casing of the storage system.
WEAR SAFETY GOGGLES!
Wear safety goggles when working on the unit.
FOLLOW THE MANUAL!
It is imperative that you follow the Installation and Operating Manual when
working on and operating the unit.
1.3 GENERAL SAFETY INFORMATION
Danger! Danger of death if the safety information is not followed!
Improper use can lead to fatal injuries. Any person tasked with working on the system must have read
and understood this manual, particularly section ““2 Safety” on page 8 et seq.
All safety information
must be followed without fail.
Everyone who works on the TESVOLT TS 48 V must follow the specifications in this manual.
This manual cannot describe every conceivable situation, and for this reason the applicable standards
and corresponding occupational health and safety regulations always take priority.
In addition, installation may also involve residual hazards under the following circumstances:
•
Installation is not carried out properly.
•
Installation is carried out by personnel who have not received the relevant training or instruction.
•
The safety information in this manual is not followed.
