manualshive.com logo in svg

Tescom TC-5942B, Руководство по эксплуатации, Страница: 4 / 47

Поделиться
Скачать
Tescom TC-5942B Скачать руководство пользователя страница 4

 

 
 
                                          

iv

 

 Safety Considerations                                   

                                       

Review the following safety precautions to avoid injury and prevent damage to this product or any 

product connected to it. 

Use Proper Power Cord   

To avoid fire hazard, use only the power cord specified for this product. 

Use Proper Power Source   

Do not operate this product from a power source that applies more than the voltage specified. 

Use Proper Compressed Air 

Do not operate this product from a compressed air that applies more than the pressure specified.   

Avoid Electric Overload 

To avoid electric shock or fire hazard, do not apply a voltage to a terminal that is specified beyond 

the range. 

Ground the Product 

This product is grounded through the grounding conductor of the power cord. In case no ground is 

available at the power outlet, it is recommended to provide a separate grounding path to the 

instrument by connecting wire between the instrument ground terminal and an earth ground to avoid 

electric shock or instrument damage. Before making connections to the input or output terminals of 

the product, ensure that the product is properly grounded. 

Do Not Operate Without Plexiglas safety shield 

To avoid electric shock or product damage or injury, do not operate this product with Plexiglas safety 

shield removed. 

Do Not Open the Bottom Cover. 

 

Do Not Operate in Wet/Damp Conditions 

To avoid injury or fire hazard, do not operate this product in wet or damp conditions. 

Do Not Operate in Explosive Atmosphere   

To avoid injury or fire hazard, do not operate this product in an explosive atmosphere. 

Provided Proper Ventilation   

To prevent product overheating, provide proper ventilation. 

Do Not Operate With Suspected Failures 

If there is damage to this product, have it inspected by qualified service personnel 

Environmental Conditions 

Refrain from using this equipment in a place subject to much vibration, direct sunlight, and where 

the surface is not level. Also, use it where the temperature is between 0 

°

C to 50 

°

C and relative 

humidity is less than 85%. 

Содержание TC-5942B
















































Отзывы:

Нет отзывов