4-4
Option 35: Pogo pin fixture
Figure 4-6
Option 35 Pogo pin fixture
Option 40: Provision for RF DUT Handler
Figure 4-7
Option 40 Provision for RF DUT Handler
Option 42: RF Probe for PCB
Figure 4-8
Option 42 prototype
Option 44: OTA (Over to Air) RF coupler
Two screws hold the pin fixture on the moving
mechanism. Use the two screws (1) and (2) to
remove or reinstall the pogo pin fixture.
Two screws hold the option 40 in the option 30 and
allow you to adjust the position of RF DUT Handler.
Use the two screws (1) and (2) to remove or reinstall
the option 40 or adjust the position.
2
1
2
1
Two screws hold the provision on the moving
mechanism and allow you to adjust the position of
RF DUT Handler. Use the two screws (1) and (2) to
remove or reinstall the provision or adjust the
position.
Impedance: 50 Ohm Nominal
Return Loss: Better than 21dB at 2GHz
Insertion Loss: Less than 0.2dB at 2GHz
VSWR: Less than 1:1.2
Housing: MBsBD (Gold plated)
RF Connector: SMA F-Male (Gold plated)
Probes Pin: BeCu (Gold plated)-LEENO(GS105C)
4-1 Optional DUT Handler (Option 10-46)