Tennant M17 Series, Руководство по эксплуатации

Страница: 83 / 236

3-53
M17 Service Information 90 17358 (0 8 -2016)
SUPERVISOR CONTROLS
SUPERVISOR CONTROLS
PRO-PANEL SUPERVISOR CONTROLS
The supervisor controls feature allows a supervisor
to program the machine scrubbing settings for
operator use. The lockout functionality will prevent
the operator from changing or saving the settings.
The supervisor controls feature will lower machine
variability for consistent, repeatable cleaning
results, machine quality assurance regardless
of user experience, and reduce user training
requirements.
There are two types of user modes that will
interface with the operator home screen:
Operator Mode - Capable of machine operation
with permissions and restrictions controlled by the
supervisor.
Supervisor Mode - Capable of machine operation
with full use of all controls, along with conf i guring
permissions and restrictions for the operator mode.
A new machine from the factory will automatically
start in the supervisor mode with a preassigned
default supervisor prof i le. The factory-assigned
supervisor login number is “1234”. This login
number is not required until it is enabled. The
default supervisor prof i le name and login number
can be changed as described in this section. If the
new assigned supervisor mode login number is
forgotten, use the recovery login code 836626826.
ENTERING THE SUPERVISOR MODE - FIRST
TIME USE ONLY
1. Turn on the machine. The main operating
screen will appear in the display..
2. Press the help button to access the help
screen.
3. Press the login button.
4. Use the keypad to enter the factory assigned
supervisor login number 1234 into the display
above the keypad. Press the enter button
when f i nished entering the supervisor login
number.
Press the backspace button if necessary to
delete and reenter a number.
5. The supervisor machine operation screen
should appear in the display. Press the settings
button to access the supervisor settings
screen.
6. Proceed to ADDING / EDITING PROFILES .