Tennant M17 Series, Руководство по эксплуатации

Страница: 34 / 236

3- 4
MAINTENANCE
The table below indicates the Person Responsible
for each procedure.
O = Operator.
T = Trained Personnel.
NOTE:Check procedures indicated (
■)
after the
f rst 50 hours of operation.
Interval Person
Resp
Key Description Procedure Lubricant/
Fluid
No. of
Service
Points
100
Hours
T 11 Battery watering system
(option)
Check hoses and
connections for damage and
wear
- Multiple
T 10 Hopper seals Check for damage and wear - 2
T 10 Hopper Clean hopper, dust f i lter
and Perma-Filter
1
200
Hours
T 13 Brakes Check adjustments - 1
T 11 Battery terminals and
cables
Check and clean - Multiple
T 14 Cylindrical brush drive
belts
Check for damage and wear - 2
T 18 Sweeping brush drive
belts
Check for damage and wear - 2
T 15 Drive wheel pivot Lubricate SPL 1
T 15 Steering chain Lubricate and check for dam-
age and wear.
GL 1
16 Steering gear chain Lubricate and check for dam-
age and wear
GL 1
T 24 Hopper chains Lubricate and check for dam-
age and wear.
GL 2
T 17 Hopper lift arm pivots Lubricate SPL 3
500
Hours
T 19 Scrub vacuum fan
motor(s)
Check motor brushes - 1 (2)
O 21 Tires Check for damage and wear - 3
T 24 Hopper chains ■ Check tension. - 2
800
Hours
T 22 Hydraulic hoses Check for wear and damage - Multiple
1000
Hours
T 7 Sweeping side brush
motors
Check motor brushes (Check
every 100 hours after initial
1000 hour check)
- 2
T 8 S weep ing main brush
motor s
Check motor brushes (Check
every 100 hours after initial
1000 hour check)
- 1
2400
Hours
T 22 Hydraulic reservoir Change hydraulic f l uid HYDO 1
LUBRICANT/FLUID
DW Distilled water.
SPL Special lubricant, Lubriplate EMB grease (Tennant part number 01433-1)
GL SAE 90 weight gear lubricant
HYDO Tennant True premium hydraulic f l uid or equivalent
NOTE: More frequent maintenance intervals may be required in extremely dusty conditions.
M17 Service Information 90 17358 (0 8 -2016)