Tennant CENTURION, Руководство оператора, Страница: 87 / 142

MAINTENANCE
85
Centurion 331020 (11--03)
HYDRAULICS
HYDRAULIC FLUID RESERVOIR
The reservoir is located on the left side of the
machine behind the cab.
Check the hydraulic fluid level at operating
temperature daily. Make sure the hopper is down
when checking hydraulic fluid level. The sight
gauge is marked with full, the black line, and add,
the red line, levels to indicate the level of hydraulic
fluid in the reservoir. Cold fluid level is mid-point of
add and full lines.
ATTENTION! Do not overfill the
hydraulic fluid reservoir or operate the
machine with a low level of hydraulic
fluid in the reservoir. Damage to the
machine hydraulic system may result.
WARNING: Burn hazard. Hot surface.
Do not touch.
The optional hydraulic fluid low alarm comes on
when the hydraulic fluid level drops below the
switch mounted in the front of the hydraulic tank.
The PTOs will automatically shut down. An
audible alarm will sound once and the text
message will appear on the display screen.
Check the hydraulic fluid reservoir, and fill with
hydraulic fluid when the alarm comes on.
WARNING: Burn hazard. Hot surface.
Do not touch.
Drain and refill the hydraulic fluid reservoir with
new hydraulic fluid every after every 800 hours of
operation.
Mounted on top of the reservoir is a filler cap with
a built-in breather. Replace the cap after every
800 hours of operation.
Lubricate the filler cap gasket with a film of
hydraulic fluid before putting the cap back on the
reservoir.
!HYDRAULIC FLUID LOW!