Tennant CENTURION, Руководство оператора, Страница: 128 / 142

MAINTENANCE
Centurion 331020 (7--04)
126
MACHINE JACKING
You can jack up the machine for service at the
designated locations under the axle. Use a Hoist
or jack that will support the weight of the machine;
a 6-ton jack is required for jacking one side of the
rear axle. It is best to empty the hopper and water
tank before jacking the machine.
Always stop the machine on a flat, level surface
and block the tires before jacking up the machine.
The front axle should be used when jacking up the
front of the machine.
The rear axle should be used when jacking up the
rear end of the machine
FOR SAFETY: When servicing machine,
block machine tires before jacking
machine up.
FOR SAFETY: When servicing machine,
jack machine up at designated locations
only. Block machine up with jack
stands.
STORING MACHINE
Before storing the machine for an extended period
of time, the machine must be prepped to lessen
the chance of rust, sludge, and other undesirable
deposits from forming. Contact TENNANT service
personnel.
NOTE: Refer to truck and engine manufacturer’s
owner’s manual for storage information.
FREEZE PROTECTION FOR WET DUST
CONTROL SYSTEM
1. Drain the water tank with the drain valve
located under the tank on the left side of the
machine.