Tennant CENTURION, Руководство оператора, Страница: 59 / 142

OPERATION
57
Centurion 331020 (11--03)
SWEEPING
1. Press the sweep switch . This will lower and
start the sweeping functions. The lights next
to these switches will come on. The touch
panel will display a SWEEPER TURNING
ON message for a few seconds, and then
display the SWEEP MODE screen.
NOTE: See the ALARMS section of the manual if
any alarms sound and appear on the display
panel while sweeping.
NOTE: The sweep mode, water flow rate, gutter
broom(s), and vacuum fan will default to the last
setting used when the sweeping operations are
started.
2. Press the water spray switch(es) to start the
wet dust control system . The light(s) next to
the switch(es) will come on.
NOTE: The wet dust control system will
automatically turn on with the SWEEP SWITCH
IF the water spray switches were in the on
position when the sweep switch was last turned
off.
NOTE: Do not use the wet dust control when
sweeping in wet conditions. Heavy snow and
or/moisture may cause compacted debris to stick
in the hopper.
3. Press the gutter broom switch(es). This will
lower and start the gutter broom(s). The
light(s) next to the switch(es) will come on.
NOTE: The gutter broom(s) will automatically turn
on with the SWEEP SWITCH IF they were in the
on position when the sweep switch was last
turned off.