Tennant CENTURION, Руководство оператора, Страница: 113 / 142

MAINTENANCE
111
Centurion 331020 (11--03)
12.Tighten the lift arm mounting hardware to
70--84 Nm (50--60 ft lb).
13.Replace the right hand panel and secure
with set aside nuts and washers.
Tighten mounting hardware to 35--50 Nm
(25--35 ft lb).
14.Start the machine. See the STARTING THE
MACHINE section of the manual. Raise the
main broom.
15.Raise the main broom.
16.Disconnect the brush bar from the hydraulic
lift cylinder. Lower the brush bar down into
storage position.
17.Close the rear door on the machine.
18.Check and adjust the main brush pattern if
necessary.