Tennant CENTURION, Руководство оператора, Страница: 116 / 142

MAINTENANCE
Centurion 331020 (11--03)
114
TO CHECK AND ADJUST THE GUTTER
BROOM PATTERN
1. Park the machine on level ground and set
the machine parking brake.
FOR SAFETY: Before leaving or
servicing machine, stop on level
surface, and set parking brake.
2. Press the gutter broom switch(es) to lower
and start the gutter broom(s). Allow the
gutter broom(s) to rotate in one place for 2
minutes.
WARNING: Side brush can move. Do
not step on side brush.
3. Press the gutter broom switch(es) again to
raise and stop the gutter brooms.
4. Drive the machine off the test area.
5. Observe the gutter broom pattern(s). The
right side gutter broom bristles should
contact the floor in a 10 o’clock to 4 o’clock
pattern when the broom is in motion,
creating a sweeping path 90--100 mm
(36--40 in) wide. The left side gutter broom
(option) should contact the floor in a 8
o’clock to 2 o’clock pattern when the broom
is in motion.
If the gutter broom(s) forward/aft tilt is
incorrect, adjust the gutter broom forward
and aft tilt with the adjustment bar:
6. Loosen the jam nuts on both ends of the
adjustment bar.
35 in min
35 in min
10 feet (min)
2:00 10:00
8:00 4:00
89 mm 89 mm
3050 mm