Tennant CENTURION, Руководство оператора, Страница: 127 / 142

MAINTENANCE
125
Centurion 331020 (11--03)
MAIN BRUSH DRAG SHOES
The main brush drag shoes are located on either
side of the brush compartment. They skim the
ground when the conveyor is lowered into the
sweeping position and are designed to contain
debris between the main brush and the conveyor
lip.
Check the drag shoes for wear after every 40
hours of operation. The drag shoes should be
replaced when the thickness is less than 3 mm
(0.125 in).
The drag shoes are attached to the upper plate by
means of a rubber flap which absorbs shock.
Check the rubber flaps every 40 hours of
operation for damage or wear.
The main brush drag shoe pivots are located on
both sides of the machine, just inside the main
brush lift arms. Check the drag shoes cables for
tension, wear, and adjustment after every 40
hours of operation. See TO CHECK AND
ADJUST DRAG SHOE ARM STOPS section of
this manual.