Tennant CENTURION, Руководство оператора, Страница: 60 / 142

OPERATION
Centurion 331020 (9--05)
58
4. Check that the machine is in the best range
for the chosen sweeping mode.
NOTE: For best slow speed sweeping results,
drive the machine in D1 (first gear) with the rear
axle in low range.
FOR SAFETY: Do not operate machine
unless all TENNANT and truck operation
manuals are read and understood.
5. Press your foot to the brake pedal, and
release the parking brake.
6. Press the propel pedal and start sweeping.
7. Activate the filter shaker frequently when
sweeping in high dust areas, or if the
SHAKE FILTER ALARM sounds.
NOTE: The SHAKE FILTER ALARM will sound
and appear when the hopper filter is full of debris,
unless the machine is equipped with the dry dust
control (option).
The touch panel will display a SHAKER
PROCESS BEGINNING message for a few
seconds, and the light next to the switch will come
on. The filter will shake for about 60 seconds,
then it will stop and the light next to the switch will
turn off.
8. Stop sweeping if the CONVEYOR STALL
ALARM sounds. This alarm means that a
large object is jammed in the conveyor.
NOTE: The CONVEYOR STALL alarm will sound
and appear when an object is jammed in the
conveyor.
To clear the jammed object, press and hold
the conveyor reverse switch for 10--15
seconds until the debris is removed.
NOTE: Do not operate the conveyor in reverse for
more than 15 seconds at a time. The belt can
become misaligned and damage to the machine
can occur.
!CONVEYOR STALL!