Tennant CENTURION Скачать руководство пользователя страница 37

Страница: 37 / 142

OPERATION

Centurion 331020 (11--03)

CONVEYOR IN SWITCH

The

conveyor in switch

appears on the

CONVEYOR CONTROL screen and controls the

position of the debris conveyor. Press and hold

the switch to move the conveyor in to the debris

hopper. The light next to the switch will come on

and stay on while the conveyor is in. Press the

switch again and the light next to the switch will

turn off.

WARNING: Conveyor throws debris.

Conveyor pinch point. Stay clear when

in operation.

NOTE: The HOPPER UP ERROR ALARM will

sound and appear if a conveyor move is

attempted and the hopper is not in the lowered

position.

CONVEYOR FORWARD SWITCH

The

conveyor forward switch

appears on the

CONVEYOR CONTROL screen and controls the

direction of the debris conveyor. This switch is

primarily used to clean the conveyor and check

the tracking of the conveyor when not sweeping.

Press the switch to rotate the conveyor in the

forward position. The light next to the switch will

come on. Press the switch again to stop the

conveyor. The light next to the switch will turn off.

WARNING: Conveyor throws debris.

Conveyor pinch point. Stay clear when

in operation.

CONVEYOR REVERSE SWITCH

The conveyor reverse switch appears on the

CONVEYOR CONTROL screen and reverses the

direction of the debris conveyor to help remove

any debris that may become jammed in the

conveyor. Press and hold the switch to reverse

the direction of the conveyor. The light next to the

switch will come on while the switch is pressed.

Release the switch and the conveyor will return to

the off position. The light next to the switch will

turn off.

WARNING: Conveyor throws debris.

Conveyor pinch point. Stay clear when

in operation.

NOTE: Do not operate the conveyor in reverse for

more than 15 seconds at a time. The belt can

become misaligned and damage to the machine

can occur.

CONVEYOR IN

CONVEYOR FWD

CONVEYOR REV

CONVEYOR OUT

VAC FAN

CONVEYOR IN

CONVEYOR FWD

CONVEYOR REV

CONVEYOR OUT

VAC FAN

CONVEYOR IN

CONVEYOR FWD

CONVEYOR REV

CONVEYOR OUT

VAC FAN

Содержание CENTURION















































































































































Результаты поиска

Содержание CENTURION

Отзывы:

Tennant CENTURION, Руководство оператора, Страница: 37 / 142

Результаты поиска

Содержание CENTURION

Отзывы: