Tennant CENTURION, Руководство оператора, Страница: 78 / 142

MAINTENANCE
Centurion 331020 (7--04)
76
Interval Key Description Procedure
Lubricant/
Fluid
No. of
Service
Points
100 Hours 1 Conveyor Lubricate lift pivots and cylinders WBG 10 y
Check conveyor drag shoe height
adjustment
-- 2
14 Engine crankcase (*) Change oil and filter EO 1
5 Brush compartment, con-
veyor and hopper seals
Check for damage or wear -- All
7 Gutter broom dry dust
control skirt pivots (option)
Lubricate -- All
15 Propulsion shafts Lubricate slip joints WBG 2 p
Check joints for wear -- 2
10 Conveyor tilt cylinder (**) Lubricate WBG 2
10 Hopper lift/tilt Lubricate WBG 2
200 Hours 9 Main brush Lubricate idler bearing WBG 1
-- Hydraulic hoses Check for damage and wear -- All
12 Wet dust control system Check water tank for damage -- 1 y
Check water pump -- 1
Check water hoses for wear -- All
Check water filter screen for dam-
age
-- 1
500 Hours -- Transmission (*) Initial transmission fluid change SPL 1
800 Hours 4 Hydraulic reservoir Replace filler cap -- 1 y
Change hydraulic fluid
(non--synthetic)
HYDO 1
3 Hydraulic fluid filter Change filter element -- 1
3 Hydraulic pump load
sense filter
Check and/or change filter
element
-- 2
12 Wet dust control system Check water hoses and clamps
for leakage or damage
-- 1
3000
Hours
-- Transmission (*) Transmission fluid change
(when using synthetic fluid)
SPL 1
4 Hydraulic reservoir Change hydraulic fluid (synthetic) HYDO 1
LUBRICANT/FLUID
EO Engine oil, SAE--CI--4 or CH--4 rated .
SPL Transmission fluid (synthetic TranSynd
t
/TES 295 Fluid) . . .
HYDO TENNANT or approved hydraulic fluid .
WBG Waterproof bearing grease (TENNANT part no. 765819) . .
NOTE: The maintenance chart covers sweeper maintenance only. Refer to Chasis and Transmission
owner’s manuals for recommended service intervals of chassis, engine and transmission.